Flood Water Rising Website - Flood Cleanup - Diverse Specialties Blog






































 

 

Category 1 E112 - Category 2 P215 - Category 3 Environmental


  NoChar E112 is an environmentally friendly concentrate which creates a spray-on gel that will minimize either direct or radiant heat transfer to adjoining surfaces (MSDS available). E112 can help in extinguishing Class A type fires, and produces a longer lasting coating which reduces the possibility of spontaneous combustion or rekindle.

  E112 can be utilized in structural fires and fire breaks to enhance the firefighters' ability to slow the fire by reducing the thermal transfer of heat from one area to another. E112 can be educted through most systems at 3% feed. An experiment was performed by the Building and Fire Research Laboratory using our E112 in a vinyl siding test. This test demonstrated that E112 when applied to combustible exterior siding, reduces the likelihood of ignition and flame spread.

  A special feature of E112 is its ability to be applied to any surface. It can be used on vertical surfaces, horizontal floor and ceiling or pitched roof surfaces or adjoining landscaping. The use of E112 will reduce the amount of water needed to fight a fire. E112 is water-soluble and can be washed off with fresh water for cleaning.

  • Application: E112 is a concentrated liquid when dispensed through eduction systems and will act as a heat transfer barrier on all types of surfaces E112 will minimize direct or radiant hear transfer to adjoining surfaces.

  • Recommended Application Rate: Concentrate to be used with an eduction system up to 3% feed. One gallon of educted gel, at 3% will normally cover 200 square feet when sprayed on approximately 1/8" thick.

  • Weight by Volume: One gallon equals 8.63 pounds

  • Specific Gravity: 1.05

  • pH Specifications: Neutral

  • Toxicity: Non toxic, non-corrosive; MSDS available upon request

  • Types of Material to be Treated: All types of natural or synthetic materials. Before application user should test applicability of product in small sample to determine suitability and\or application rate.

  • Storage Specification: Keep container sealed to prevent evaporation. Keep from freezing.

  • Volatility Before Use: None

  • Volatility After Use: None

  • Testing Reference: The product has been field tested and demonstrated on various flammable situations as well as a thermal barrier. Information available upon request.

  • Method of Disposal: Water soluble rinse with a mixture of baking soda and water.

  • Packaging: Five-gallon container..

  • Performance Characteristics:

  • Will stick to horizontal or vertical surfaces

  • Easy clean up

  • Excellent heat barrier

  • Environmentally friendly

  • Benefits:

  • Environmentally friendly

  • Will reduce water requirements in fire fighting

  • Product is non-toxic.

  • Notice:  All statements, technical information and recommendations contained therein are based on  information and tests we believe to be reliable. The accuracy or completeness hereof are not
    guarantied.


  P215 is a non-toxic, environmentally friendly paste used as a heat transfer barrier on all types of surfaces, vertical or horizontal. P215 will minimize direct or radiant heat transfer to adjoining surfaces (MSDS available).

  Plumbers, welders or anyone using a torch can benefit from NoChar's P215 heat barrier paste. Asbestos free P215 can be used on natural or synthetic surfaces adjoining the welding or soldering areas such as PVC drains, wood trim, plastic or vinyl cabinets. Heat sensitive surfaces can be temporarily coated during the soldering process and then easily cleaned by wiping the P215 off. P215 is water-soluble and therefore can be removed with just a damp cloth.

  • Application: P215 is a paste used as a heat transfer barrier on all types of surfaces. P215 will minimize direct or radiant hear transfer to adjoining surfaces.

  • Recommended Application Rate: 1/4" or more, depending on protection needed.

  • Weight by Volume: One-half gallon equals 70 ounces.

  • Specific Gravity: 1.09

  • pH Specifications: Neutral

  • Toxicity: Non toxic, non-corrosive; MSDS available upon request

  • Types of Material to be Treated:  All types of natural or synthetic materials. Before application user should test applicability of product in small sample to determine suitability and\or application rate.

  • Storage Specification: Keep container sealed to prevent evaporation. Keep from freezing.

  • Volatility Before Use: None

  • Volatility After Use: None

  • Testing Reference: The product has been field tested and demonstrated on various flammable situations as well as a heat barrier. Information available upon request.

  • Method of Disposal: Water soluble, rinse with a mixture of baking soda and water.

  • Packaging: One-half gallon resealable containers; 8 oz. resealable jars.

  • Performance Characteristics:

  • Will stick to horizontal or vertical surfaces

  • Easy clean up

  • Excellent heat barrier

  • Environmentally friendly

  • Benefits:

  • Environmentally friendly

  • Product is non-toxic.

  • Notice:  All statements, technical information and recommendations contained therein are based on information and tests we believe to be reliable. The accuracy or completeness hereof are not guarantied.

Enormous responsibilities lay in containment and disposal of hazardous materials. Concerns are with environmental issues, as well as money, time, storage and disposal costs. The products most often used contain kitty litter, peat moss, saw dust and even feathers that leach out once the waste is contained. And then the additional volumetric increase in contaminated material has to be stored before shipping to a very costly hazardous waste landfill.

Move into the next decade with a better solution - NoChar's A600 series products.

NoChar's A600 series products are environmentally friendly, fast acting, efficient, cost effective products that meet the tough EPA standards for hazardous spill control and disposal. NoChar's Spill Response Technology (S.R.T.) is designed for use by hazardous material or emergency response teams as a first step, immediate response to spills. NoChar's S.R.T. includes state-of-the-art third generation polymer technology which bonds spills into a solidified mass. Wherever safe, quick and efficient response for containment of oil, chemical or bodily fluid spill is necessary, NoChar products are the material of choice.

Product Group 1 - Petro Bond

  • NoChar's A610 - Solidifies Water and Land-Borne Petroleum-Based Spills
  • NoChar's A650 - Congeals and Bonds Water-BornePetroleum-Based Spills

Product Group 2 - Retardant Liquid Bond
NoChar's A630R - Solidifies Liquid Land Based Spills

Product Group 3 - Acid Bond
NoChar's A660 - Acid Solidifier

Product Group 4 - BIO-HAZ Bond
NoChar's A680 - Bonds All Bodily Fluids

Product Group 5 - A600 Series
Shakers, Pillows, Booms, Socks, Bilge Bags, Spill Response Kits, Bulk Product Information

  • All Levels of Government
  • Haz-Mat Response Teams
  • Hazardous Material
    (haz-mat) Companies
  • Waste Management Companies
  • Fuel Depots
  • Landfill Operations
  • Schools
  • Environmental Companies
  • Airlines
  • All Divisions of Military
  • Industrial Safety Companies
  • Chemical Transportation
  • Gas Stations
  • Hospitals and Nursing Homes
  • Day Care Centers
  • Vehicle Repair Centers
  • Marinas
  • Fire Departments
  • Environmental Consultants
  • Trucking Companies
  • Refineries
  • Emergency Medical Service (EMS) units
  • Mass Transportation
  • Utility Companies
  • Law Enforcement

  Estimates, comparisons and cost analyses of NoChar's Environmental Protection Products are available on request. Pick-up ratios are determined by volume and time. Laboratory test results on bonding ratios are calculated to be conservative and attainable on a regular basis.

  NoChar's A600 series products have also been approved for incineration and/or an alternate fuel source and are currently the only one that meets the EPA ruling on landfill disposal (see below). NoChar's products do not leach out once they have been bonded to the spill.

54452 Federal Register/ Vol. 57. No.223/ Wednesday, November 18, 1992/ Rules and Regulations

Hazardous Waste Management; Liquids in Landfills

Agency: Environmental Protection Agency.

Action: Final

Summary:
  Under authority of the Resource Conservation and Recovery Act (RCRA) as amended by the Hazardous and Solid Waste Amendments of 1984 (HSWA), EPA is promulgating this final rule regarding the landfill disposal of containerized liquids mixed with sorbents. This rule satisfies the statutory requirement that EPA issue a rule that prohibits the disposal in hazardous waste landfills of liquids that have been sorbed in materials that biodegrade or that release liquids when compressed as might occur during routine landfill operations. This rule will help insure the stability of materials in hazardous waste landfills.


Visit the NoChar Website for more information

Copyright 2001-2008 Diverse Specialties, Inc.